Stone Splitters, Closed Frame
for small Paving Stone & Cobblestone
Techno Split Stone Splitting Machine TS 80-40
Hydraulically operated, stone splitting machine equipped with silenced power unit for splitting every kind of stone. Designed for the production of wall face stones, and tiles of various dimensions. Has a with splitting length of 31.5” and splitting height of 15.7”. This stone pitching machine has a robust design, is easy to use, and withstands high stresses imposed when making small stone paving stones.
TECHNICAL DATA
Splitting length 5.9” to 31.5”
Splitting height 3.5” to 15.7”
Depth 1.2” to 15.7”
  
Machine suitable for pitching on 4 sides starting from semi-finished pieces of natural stones.
Loading and unloading the products:
Manual for smaller blocks or with the help of an electric hoist for blocks.
Work scraps:
The work scraps obtained from the pitching are recovered using a “U” shaped raceway and from there channeled into a container of about 20” in height.
Frequency:
1 piece about every 5 seconds from the moment the START cycle is launched.
The loading and unloading times are not considered however, which can vary largely depending on the size of the piece.
Operation:
The blocks to be pitched are positioned manually and symmetrically between the 4 blades of the pitching machine.
Once the slab or the block has been inserted and the START CYCLE button has been pressed, the block is first clamped by a clamping unit and then pitched first with the horizontal blades and then with the vertical ones.
The scraps produced by the pitching fall down and are recovered by the raceway.
Once the pitching operation has finished, the piece is recovered by the operator.
The pitching phase finishes at this point and the cycle starts again when a new piece is inserted.
The pitching takes place without moving the block and hence with a perfect perimeter.
The machine can be made automatic for the automatic positioning of the piece
Stone Splitters USA has hydraulic operated stone splitting machines for every kind of stone. The machinery is primarily designed for the manufacture of tiles, curbstones, and split-faced walling, but can also be adapted to other areas of the stone industry. The crushing power and long blade of the the Techno Split models are adequate for large wall stone and curbing production. Stone Splitters USA is now the US distributor for these great new Techno Split machines, tooling and parts.
The Techno Split line of stone machinery supplied by Stone Splitters USA come in many sizes and can be adapted to many uses in the stone industry. Paving stone and tile cutters will want to see the Open Frame models. Ease of operation and fast splitting are sure to increase production compared to underpowered splitters. For large block splitting operations encountered in the stone industry, integrated conveyor systems and long blades and crushing power make splitting of large blocks an easy project.
|
