Concrete Splitters For
Splitting Concrete Blocks
Techno Split Concrete Splitting Machine TS 80-28
 Hydraulically operated, concrete block and cement block splitting machine equipped with silenced power unit for splitting concrete and stone. Designed for automated concrete block splitting. Has a splitting length of 31.5” and splitting height of 11.0”. This concrete block splitting machine has a robust design, is easy to use, and withstands high stresses imposed when making small stone paving stones. Daily productivity from 2,000 to 4,000 blocks per day.
The cement blocks are loaded onto the slat conveyor located at the inlet of the splitting machine. By means of the pneumatic blocking system you can decide whether to split multiple rows of blocks (without the aid of the side blades) or single rows (with the aid of the side blades). The pneumatic blocking system is enabled or disabled from the control desk and programmed from the operator panel. The blocks are pushed under the blade and split (the advance of the pusher is programmed by means of the operator panel). The system is prearranged for the evacuation of waste: if programmed (from the OP panel) the conveyor opens, the pusher pushes forward the row of blocks and the waste falls from the bench onto the waste evacuation conveyor belt. Once the row of blocks has been formed on the outlet conveyor, the latter opens slightly and pulls the row of blocks into unloading position. It then closes again to allow the formation of a new row. The opening of the conveyor is programmed from the operator panel. The system may initially be equipped with pneumatic grippers and, thanks to the prearranged fittings, it may then be enlarged with automatic grippers.
TECHNICAL DATA
Splitting length 31.5”
Splitting height 11.0”
Strength 80-90 Tons
Stone Splitters USA has hydraulic operated concrete and cement block splitting machines for every kind of stone. The machinery is primarily designed for the manufacture of tiles, curbstones, and split-faced walling, but can also be adapted to other areas of the stone industry. The crushing power and long blade of the the Techno Split models are adequate for large concrete and cement block splitting operations. Stone Splitters USA is now the US distributor for these great new Techno Split machines, tooling and parts.
The Techno Split line of concrete splitting machinery supplied by Stone Splitters USA come in many sizes and can be adapted to many uses in the stone industry. Paving stone and tile cutters will want to see the Open Frame models. Ease of operation and fast splitting are sure to increase production compared to underpowered splitters. For large cement block splitting operations encountered in the stone industry, integrated conveyor systems and long blades and crushing power make splitting of large blocks an easy project.
|
